KOD NOKIA

Kod ini hanya untuk telefon NOKIA sahaja tetapi ada sesetengah kod yang boleh digunakan untuk jenis telefon yang lain.

NOKIA 3110

Show IMEI code

What¡¯s the IMEI code of your phone , simply press:

* # 06 #

you¡¯ll read it on display

Software Version

This code shows your software version, date of manufacture and hardware model number of your phone

* # 3 1 1 0 #

Show Warranty information

To get additional information from your phone you can use the so called

"warranty codes", try typing:

* # 92702689 # (= * # war0anty # )

You will be asked a ¡® warranty code:¡¯

type:

6232 (OK) : To display the month and year of manufacture

7332(OK) : To display the date of the last repairment

7832(OK) : To display ( if previously set) the date where the phone was purchased.

9268 (OK) : To display the serial number

37832 (OK) : To set the purchasing date MMYY ( Warning : you can only to do this once )

87267 ( OK) : To confirm transfer

Sim clock information

To check if the Sim-Clock can be stopped type :

* # 746025625 # (= * #sim0clock# )

Restore factory setting

To restore factory setting

(This does not include memory , language and counters ) type:

* # 7780 #

SPlock Mode

If you want to inquire your phone about SPlock, u can use the following:

# pw + 1234567890 + [y] #

If you put your hands on your 10 digits SPlock code yet, then u can modify the status of the above results , type:

# pw + [mastercode] + [ y ] #

where:

[ y ] is 1 up to 4 , and 

any 10 digits number seems working instead of "1234567890"

Unlock SPlock

Here is a way to Unlock your phone which is Service Provider locked,

without to know SPlock code!!!!

Give it a try :

First of all, PIN CODE MUST BE ON, then press:

C

C and hold until it clears display

* and hold until start to blink

* and hold until start to blink

04* **your pin>#

Each time you turn your phonr OFF its reset the lock,

so this need to be done each time you¡¯ll turn your phone ON

Anyway it¡¯s better than nothing, isn¡¯t it ?

NOKIA 3210

Show IMEI code

What¡¯s the IMEI code of your phone , simply press:

*#06#

you¡¯ll read it on display

Half Rate Codec

Half Rate Codec will decrease sound quality but it gives you about 30%

lower battery consumtion

You may enable it by this code : * 4720 #

or Disable it : # 4720 #

Sim Clock Information

To check if the Sim-Clock can be stopped type:

* # 746025625 # (=*#sim0clock#)

SPlock Mode

If you want to inquire your phone about SPlock , you can use the following:

#pw+ 1234567890 + [ y ] #

If you puts your hands on your 10 digits SPlock code yet, 

then you can modify the status of the above results, typeing:

# pw + [ mastercode ]+[ y ] #

where:

[y] is 1 up to 4 and

any ten digits number seem working instead of"1234567890"

NOKIA 6110/6150

Show IMEI code

What¡¯s the IMEI code of your phone , simply press:

* # 06 #

you¡¯ll read it on display

Software Version

This code shows your software version, date of manufacture and hardware model number of your phone

* # 0000 #

if the above won¡¯t work try this one too,

* # 6110 #

Show Service Menu

To get additional information from your phone you can use the so called

"warranty codes", try typing:

* # 92702689 # (= * # war0anty # )

Now you can just scroll through the information like in other menu.

If it won¡¯t work and the phone ask you for a ¡®warranty code:¡¯ try:

6232 (OK) : To display the month and year of manufacture

7332(OK) : To display the date of the last repairment

7832(OK) : To display ( if previously set) the date where the phone was purchased.

9268 (OK) : To display the serial number

37832 (OK) : To set the purchasing date MMYY ( Warning : you can only to do this once )

87267 ( OK) : To confirm transfer

Enhanced Full rate codec

*3370 #EFR will be activated after a reboot of the phone ( consumes more power )

# 3370 # EFR will be switched off after a reboot of the phone

Software Bug

Someone report us that some Nokia 6110 remain dead if you run out of battery

while the phone has its keybord locked.

Nokia seems to be aware of this bug and hopefully will be correct in next software

version (6110I maybe ??)

Profiles Menu

If you press the "Power ON"

button for a short moment, the menu with the profiles is shown on the display

If you press one more time, the mobile turns itself OFF.

You can use the up and down cursor keys to scroll and enable a different setting.

NOKIA 8110

Show IMEI code

What¡¯s the IMEI code of your phone , simply press:

* # 06 #

you¡¯ll read it on display

Software Version

This code shows your software version, date of manufacture and hardware model number of your phone

* # 8110 #

Show Service Menu

To get additional information from your phone you can use the so called

"warranty codes", try typing:

* # 92702689 # (= * # war0anty # )

Now you can just scroll through the information like in other menu.

If it won¡¯t work and the phone ask you for a ¡®warranty code:¡¯ try:

6232 (OK) : To display the month and year of manufacture

7332(OK) : To display the date of the last repairment

7832(OK) : To display ( if previously set) the date where the phone was purchased.

9268 (OK) : To display the serial number

37832 (OK) : To set the purchasing date MMYY ( Warning : you can only to do this once )

87267 ( OK) : To confirm transfer

Sim clock information

To check if the Sim-Clock can be stopped type :

* # 746025625 # (= * #sim0clock# )

Unlock SP lock

Here is a way to Unlock your phone which is Service Provider locked,

without to know SPlock code!!!!

Give it a try :

First of all, PIN CODE MUST BE ON, then press:

C

C and hold until it clears display

* and hold until start to blink

* and hold until start to blink

04* **your pin>#

Each time you turn your phonr OFF its reset the lock,

so this need to be done each time you¡¯ll turn your phone ON

Anyway it¡¯s better than nothing, isn¡¯t it ?

NOKIA 8810

Show IMEI code

What¡¯s the IMEI code of your phone , simply press:

* # 06 #

you¡¯ll read it on display

Software Version

This code shows your software version, date of manufacture and hardware model number of your phone

* # 0000 #

Show Service Menu

To get additional information from your phone you can use the so called

"warranty codes", try typing:

* # 92702689 # (= * # war0anty # )

You¡¯ll get the following :

Serial number

manufacture date

the date of purchase( if entered)

The date of last repairment

transfer user data

Sim clock information

To check if the Sim-Clock can be stopped type :

* # 746025625 # (= * #sim0clock# )

NOKIA 9000

Show IMEI code

What¡¯s the IMEI code of your phone , simply press:

* # 06 #

you¡¯ll read it on display

Software Version

This code show you software version of your communicator:

*# 682371158412125#

Date of manufacture

This code shows you the manufacturing date of your Communicator:

*#3283# (or *#DATE#)

Selamat Mencuba....